Showing 1–12 of 13 results
Mon-Fri : 9.00 AM to 5.30 PM
Saturday : 9.00 AM to 2.30 PM
Sunday : Closed
0772352235
Add us on WhatsApp/Viber for Free Updates
Fashion own buy sizes are designed to fit the following body measurements. Some product's may vary from these measurements but you can still use them as a guide.
Measurement:: inches
Size | S | M | L | XL | 2XL | 3XL | 4XL | 5XL |
|---|---|---|---|---|---|---|---|---|
| UK Size | 8 | 10 | 12 | 14 | 16 | 18 | 16 | 18 |
| Bust (cm) | 84.6 | 90.6 | 96.6 | 102.6 | 108.6 | 114.6 | 120.6 | 126.6 |
| Waist (cm) | 78.6 | 84.6 | 90.8 | 96.8 | 102.8 | 108.8 | 114.8 | 120.8 |
| Hips (cm) | 91.5 | 95 | 99.5 | 105.5 | 110.4 | 115.5 | 120.5 | 130 |
| *measurements shown in the size guide refer to body measurements and not clothing measurement. | ||||||||
CHEST - Place the flat measuring tape close under the arms and measure around the fullset part
WAIST - Measure around natural waistline.
HIP - Measure 20cm down from the natural waistline.
Fashion own buy sizes are designed to fit the following body measurements. Some product's may vary from these measurements but you can still use them as a guide.
Measurement:: inches
| SIZE | CHEST | WAIST | HIP |
|---|---|---|---|
| XS / 6 | 31 | 24 | 34.5 |
| S / 8 | 32.5 | 25.5 | 36 |
| M / 10 | 34 | 27 | 37.5 |
| L / 12 | 36 | 29 | 39.5 |
| XL / 14 | 38 | 31 | 41.5 |
| XXL / 16 | 40 | 33 | 43.5 |
CHEST - Measure around the fullest part, place the tape close under the arms and make sure the tape is flat across the back.
WAIST - Measure around natural waistline.
HIP - Measure 20cm down from the natural waistline.
| size | chest | waist | sleeve length | shoulder width | product length |
|---|---|---|---|---|---|
| S | 19" | 18" | 8.25" | 17" | 26" |
| M | 20" | 19" | 8.5" | 17.5" | 27" |
| L | 21" | 20" | 8.75" | 18" | 28" |
| XL | 22" | 21" | 9" | 18.5" | 29" |
| 2XL | 23" | 22" | 9.25" | 20" | 30" |
| 3XL | 24" | 23" | 9.5" | 20.5" | 31" |
| 4XL | 25" | 24" | 10" | 21" | 32" |
| 5XL | 26" | 25" | 10.5" | 21.5" | 33" |
NOTE - There is a tolerance range of +/- 0.5 for above spec
